Trunnion Mounted Ball Valve – Flanged or Welded Ends, API 6D Certified

Trunnion Mounted Ball Valve – Flanged or Welded Ends, API 6D Certified

Trunnion Mounted Ball Valve is mainly composed of valve body, ball, stem (trunnion), seat, seals and operating mechanism. Among them, the ball is the key part of the valve, responsible for controlling the valve switch; the valve body is divided into upper and lower parts, connected together by bolts; the valve stem (trunnion) is fixed on the ball, through the rotation of the valve stem to control the rotating angle of the ball; the valve seat and the ball seal to ensure that the valve closes the sealing; the operating mechanism can be manual or electric, sprocket or gearbox, etc.

Phone: +86-577-86910577

Email: nini@futaivalves.com

Address: Building 1, No. 896 Jinhai 1st Road, Airport New Area, Wenzhou Bay New District, Wenzhou, Zhejiang, China

Request a Quote

Product Information

Size:2″ – 48″
Pressure ratings:Class 150,300,600,900,1500,2500
Port Size:Full Bore, and Reduced Bore
Material :WCB,CF8,CF8M,A105N, A182-F316 SS, A350-LF2, A350-LF6, and F51 Duplex
Seat Material:Devlon (PEEK and others available upon request)
ENDS:Raised Face (RF), Ring Type Joint (RTJ), Butt Weld (BW), and Flanged X Butt Weld

Standards:

Design and Manufacture: API 6D
Face To Face: ASME B16.10
Flanged Ends: ASME B16.5
Test And Inspection: API 598

Features:

Two piece split body or three piece bolted body
With trunnion mounted ball
Blow-out proof stem, Anti-staic,
Optional locking device or stem extension,
Optional direct mounting to ISO 5211